START ENGINEERING JSCo

Start Engineering Ltd. has long-term partnerships with a number of leading engineering and manufacturing companies, both on the Bulgarian and international markets. With some of these partners, the company has concluded formal representation agreements. In this way, we are not only competitive, but we can offer the conditions and deployment of products from leading companies on the market.

Syscom Instruments SA

• 
  Дългогодишно сътрудничество с Bartec Syscom
• 
  Дългогодишно сътрудничество с Bartec Syscom

"Start Engineering" JSCo, thanks to the successful installation of seismic monitoring systems at Tsankov Kamak and Plovdivts dams and the ongoing commissioning of Studena Dam became official representative of the Swiss company Syscom Instruments SA, Member of the Bartec Group (one of the world's leading equipment manufacturers in this particular sector) for Bulgaria, Albania, Macedonia, Bosnia and Herzegovina, Serbia and Montenegro.
The scope of our business includes supply, installation, configuring, commissioning and maintenance of all types of equipment at sites in extreme conditions and monitoring data of utmost importance.

ABB

• 
  Дългогодишно сътрудничество с ABB
• 
  Дългогодишно сътрудничество с ABB
• 
  Дългогодишно сътрудничество с ABB
• 
  Дългогодишно сътрудничество с ABB
• 
  Дългогодишно сътрудничество с ABB
• 
  Дългогодишно сътрудничество с ABB
• 
  Дългогодишно сътрудничество с ABB
• 
  Дългогодишно сътрудничество с ABB

• • I&C – Contract with ABB - Germany for sales and service provision (in Bulgaria) of the full volume of instrumentation equipment, manufactured in the factories of ABB in Germany, Italy, England and the USA.
• • Automation Systems - Long years of cooperation with ABB – Bulgaria for delivery of equipment (PLC, DCS) for projects and sites in Bulgaria. Contract with ABB – Austria for participation in design, development of Applicatioin Software, Starting up and adjustment works for projects in third countries.
• • Continuous Emissions Monitoring System (CEMS) - Contract with ABB - Germany for sales, installation, implementation, service provision, consultant activity of the gas-analyzing systems and equipment, manufactured in the factories of ABB in Germany and the USA.

VALMET Automation

• 
  Дългогодишно сътрудничество с VALMET Automation
• 
  Дългогодишно сътрудничество с VALMET Automation
• 
  Дългогодишно сътрудничество с VALMET Automation
• 
  Дългогодишно сътрудничество с VALMET Automation
• 
  Дългогодишно сътрудничество с VALMET Automation

• Automation Systems
  Contract with “METSO Automation” - Finland (signed in 2007 and updated in 2016 with VALMET Automation) for participation in design, development of Application Software, Starting-up and implementation Works.
  Successfully accomplished more than 27 projects, mainly in Europe in different branches such as Power, Cellulose paper industry and others.
• Cooperation with the representation of VALMET Automation in Bulgaria for projects in the country.

DURAG GROUP

• 
  Дългогодишно сътрудничество с DURAG GROUP
• 
  Дългогодишно сътрудничество с DURAG GROUP
• 
  Дългогодишно сътрудничество с DURAG GROUP
• 
  Дългогодишно сътрудничество с DURAG GROUP

Contract with DURAG Group - Germany for sales, implementation, service provision, consultant activity and others of:

• Continuous Emissions Monitoring System (CEMS) - mainly for measurement of dust and flue gas flow measurement;
• Thermographic cameras - mainly for applications in TPPs, cement industry, refineries and others.
• Emission calculators - specialized systems for data processing for emission monitoring;
• Equipment for combustion automation - flame sensors, control units, ignition systems and others.
• • Systems for burning of exhaust gasses in refineries, treatment plants and others.

Buhler Technologies

Contract with Buhler Technologies for official representation on the territory of the Republic of Bulgaria.

Други:

Long years of cooperation with leading companies (SIEMENS, ALSTOM Power, FESTO Bulgaria, YOKOGAWA, AKHNATON, V&V ISOMATIC and others) for different projects, offers, etc.

In the environment of competition, both on the domestic and on the world market, the development and prospering of “Start Engineering” JSC will always exclusively depend on keeping the existing markets and winning new markets. This can be achieved only with continuous improvement and professionalism of work, in order to provide the production of competitive products with high and guaranteed quality, which also determines our final objective:

COMPREHENDED HIGH QUALITY OF THE ACTIVITY OF EVERYONE FOR COMPLETELY MEETING THE MARKET REQUIREMENTS WITH RELIABLE AND COMPLYING WITH THE REQUIREMENTS OF THE BULGARIAN AND INTERNATIONAL STANDARDS EFFECTIVE PRODUCTION.

In order to achieve its policy in relation to the quality and environment, the management is going to conduct active and purposeful work in the following directions:

1. Provision of priority of quality and correspondence of the product to the clients’ requirements and the standardization requirements;
2. Provision of priority of the environment in the activity of all divisions of the company and placing the quality and the environment in the basis of all market and functional strategies and plans;
3. Continuous increasing the technical reliability of the equipment and facilities and improving the technological processes and observing the sanitary and hygiene standards;
4. Creation of a new way of thinking and regard to the work of each member of the company, which should motivate him/her to achieve personal and collective quality during the execution of the activities;
5. Continuous increasing of qualification and motivation of the personnel for high quality work;
6. Setting the rights, obligations and interactions of each unit and each member of the team for execution of the company’s activity;
7. Development and improvement of mutually profitable relationships and cooperation with all our clients and suppliers;
8. Provision and demonstration before our clients, and before ourselves of continuous improvement of the quality and environment;
9. Periodic analysis and assessment of the achieved results from the increasing of quality and environment and systematic control for the execution of the assigned tasks. Seeking of personal responsibility;
10. Setting the measurable goals on the quality and environment for each year and development of a separate program for reaching of goals on the quality and environment, which is being reviewed and accepted at a Management meeting in the beginning of the year, which is reviewed and explained to the entire personnel;
11. The necessary resources for the effective functioning of the Quality Management System (QMS) complying with БДС EN ISO 9001:2008 will be provided for implementing this policy;
12. Meanwhile, the company’s management will require all managers, specialists and workers to demonstrate professionalism, labor discipline and responsibility, to be well acquainted with the quality management system, to strictly observe the requirements, set forth in the system’s documents and to assist its implementation and development.

Performing periodic analysis of the national and standardization documents and other requirements, including the requirements for labor health and safety and environmental protection, assessment of their reflection upon the activity executed by the company, as well as continuous control for execution of all obligations, enforced by this kind of documents.

• Occupational health and safety management.
• Environmental management and prevention of polutions, expressed in efficient management of the waste generated due to the activity and implementation of appropriate technologies and materials, having minimal negative impact on the environment.
• Continuous increasing of qualification and motivation of the personnel for high quality work.
• Performing periodic analysis and assessment of the achieved results.
• Continuous improvement of the quality management system, of the occupational health and safety and of the results in relation to the environment preservation.

The Management of “START ENGINEERING” JSC realizes, that declaring and applying a clear Policy for providing healthy and safe labor conditions, maintained by the entire personnel, is an inseparable part of the entire Company’s Management System.

Setting the measures for continuous improvement of the System in its portion for occupational health and safety are aimed towards preserving the personnel’s life health and working capacity, increasing its welfare and satisfaction.

In order to realize the conception of the System, the Management applies the following basic principles in carrying out its activity:

1. Based on risk assessment prepared, and in compliance with the health risks and hazards, the Company’s Management maintains and applies a clear Policy, explained to all employees, which is available to all parties concerned.
2. The unified policy for prevention incorporates the technological regulations, the workplaces and work organization, labor conditions and the social relationships.
3. Conducts preventive activity for overcoming and reducing the risk for providing safe labor conditions.
4. The compliance with, and observing the requirements of the laws in force in the country and regulations in the field of occupational health and safety as a minimum, as well as the voluntarily undertaken obligations and programs, are a basis for good attitude towards the Company of all parties concerned.
5. Provides the resources, required for the execution of the assigned objectives and tasks on occupational health and safety, and is a priority at all levels of the Company.
6. In order to adequately comply with the requirements for communication, the Management of “START ENGINEERING” JSC guarantees consulting with the workers and their representatives and encourages the active participation of all team members at all stages of applying the Occupational Health and Safety Management System.
7. Each team member of “START ENGINEERING” JSC is obliged to take care and be responsible for his/her and his/her colleagues health and safety in view of the effects of his/her activities at work.
8. The Company’s Management assumes the obligation to encourage inclusion and engagement of each team member in suggesting and implementing activities for preventing potential hazards.
9. Provides appropriate training for improving qualification and skills, required for execution of the specific obligations and responsibilities and is a main objective of the Management of “START ENGINEERING” JSC.
10. The Management of “START ENGINEERING” JSC assumes the obligation to maintain the Policy so, that it would be adequate and appropriate to be applied in the Company’s activities.

The top management of “START ENGINEERING” JSC is convinced, that applying the basic principles of Occupational Health and Safety and the permanent care for the people will increase the confidence and improve the image of the company.

Following the basic objectives for:

• Constant and progressive improvement of the occupational health and safety, reducing to minimum the cases of labor accidents, occupational diseases and failures;
• Maintaining steady ability to work of the workers, occupational fatigue and stress prophylaxis and increasing labor productivity;
• Implementing personal protective equipment;
• TPersonnel training at all levels for obtaining occupational safety culture.

The Company’s Management is obliged to maintain effective and efficient Occupational Health and Safety Management System, which will be assessed annualy for adequacy and suitability.